Medik Prime Natural Latex Surgical Gloves Powder Free
These gloves are an effective alternative to powdered natural latex surgical gloves, as they do not contain airborne powder particles. Being powder-free, they help reduce the risk of powder-related complications such as induced allergies, post-operative adhesions, and granuloma formation, while also eliminating the need to wash or wipe the gloves prior to surgical procedures.
The gloves are manufactured with low protein levels and undetectable chemical residues, minimizing the risk of both Type I (immediate) and Type IV (delayed) hypersensitivity reactions and supporting safer use for both healthcare professionals and patients.
Info
An alternative choice over powdered natural latex surgical gloves as these does not contain airborne powder particles. Being powder free, the gloves provide freedom from induced allergies, adhesions, and granulomas in addition to eliminate the need to wash or wipe the gloves before a surgical procedure.
Low Protein and Undetectable Chemical Residue to minimize Type I /IV hypersensitivities.
Technical Specs
| PHYSICAL DIMENSION | TYPICAL PRODUCT SPECIFICATIONS | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
| THICKNESS Single wall (mm) | ASTM D-3577-19 SPECIFICATIONS | TYPICAL PRODUCT SPECIFICATIONS |
|---|---|---|
| Cuff (measured at 25mm from bead) | Min. 0.10 | 0.12 - 0.14 |
| Palm (measured at center of palm) | Min. 0.10 | 0.18 - 0.20 |
| Finger (measured at 35mm from extreme tip) | Min. 0.10 | 0.22 - 0.24 |
Other Information
| PHYSICAL PROPERTIES | ASTM D3577 SPECS. UNAGED | TYPICAL PRODUCT SPECIFICATIONS | ASTM D3577 SPECS. UNAGED | TYPICAL PRODUCT SPECIFICATIONS |
|---|---|---|---|---|
| Tensile Strength, MPa | Min. 24.0 | 27.0– 29.0 | Min. 18.0 | 20.0 - 23.0 |
| Elongation at break, % | Min. 750 | 885 - 920 | Min. 560 | 800 - 850 |
| Stress at 500% Elongation, MPa | Max. 5.5 | 3.5 - 4.0 | — | — |
| OTHER PROPERTIES | ASTM D3577 | TYPICAL PRODUCT SPECIFICATIONS |
|---|---|---|
| Protein Content | 50ug/dm2 max | 20 - 30 ug/dm2 max |
| Powder Free Residue | 2mg/dm2 max | 0.2 - 0.38 mg/dm2 max |
| Freedom from Holes | AQL 1.5 | AQL 1.5 |
| Recommended Shelf Life | 3 years upon date of Manufacture (In undamaged or opened package if stored properly) |
| Sterilization | Ethylene Oxide Sterilization (ISO 11135-1) |
| Product Conformance | ASTM D3577; EN455 Parts 1,2,3 and 4 |
Manufactured under ISO 9001:2015 & ISO 13485:2016 (Medical Device) Quality Management System